Cost to replace bathroom faucet [2022]

The average cost to replace bathroom faucet is $190, with most homeowners spending between  $230 to $680 to have a professional plumber install a new one. The total cost will depend on the type of faucet you choose and whether you need to replace the supply lines as well.

Are you planning to replace your bathroom faucet in the near future and not sure about the cost involved? If that’s the case, keep on reading as we’re about to give you a breakdown of the average cost to replace a bathroom faucet. And some bonus tips on how to save money on the project. So, let’s get into it.

How Much Does It Cost To Replace A Faucet?

Replacing a bathroom faucet isn’t counted as a very expensive home repair. Depending on the type of faucet, the material, and the labor requirement, the cost can range from $230 to $680. Aside from the cost of the actual faucet, replacing a faucet also needs some tools and supplies, such as pliers, a wrench, Teflon tape, and a pipe-joint compound.

Homeowners who are not comfortable completing the repair themselves can hire a plumber to do the job. The cost of hiring a professional will typically be higher than doing the repair by yourself, but it is definitely worth it for peace of mind.

Cost Of A Bathroom Sink Faucet

A bathroom sink faucet is a necessary fixture in any bathroom. It’s not just a place to wash your hands, but also adds a decorative touch. When shopping for a sink faucet, you will likely be surprised by the wide range of faucet installation costs. A basic model can cost as little as $20, while a more elaborate design can easily exceed $200.

The main factors that affect the cost of a sink faucet are materials, finish, and additional features. For example, a faucet made from high-quality brass will be more expensive than one made from cheaper stainless steel. Similarly, a faucet with a polished chrome finish will be more expensive than one with a basic brushed finish.

Finally, features such as built-in water filtration or LED lighting will also add to the cost of a sink faucet. You can find the perfect one for your bathroom by considering your budget and needs.

How To Save Money?

There’s no need to spend a fortune when you’re outfitting your bathroom with new sink faucets. Follow a few simple tips and find high-quality fixtures at a fraction of the cost.

One of the best ways to save money is to buy bathroom sink faucets online. Many retailers offer significant discounts on their web-based inventory, so you’ll often find the same fixtures for much less than you would pay in-store. In addition, online retailers often have a wider selection to choose from, hence more chances of finding the perfect faucet for your bathroom.

Another way to save money is to purchase bathroom sink faucets that are on sale. Many stores run periodic sales on their merchandise and it’s worth checking back often to see some good deals there. You can also sign up for email newsletters from your favorite stores, which will notify you about upcoming sales and promotions.

Finally, don’t forget to take advantage of the manufacturer’s rebates when you’re buying bathroom sink faucets. These rebates can provide substantial savings, and are also very easy to redeem.

Labor Cost To Replace A Bathroom Faucet

Replacing a bathroom sink faucet can be surprisingly labor-intensive, and it mostly costs between $130-$350. It can take a couple of hours to replace a faucet and the plumber will charge for per hour cost. Their per hour charges may vary from $45 to $150.

Depending on the job’s complexity, replacing a bathroom sink faucet can take several hours too. Removing the old fixture also adds up in the labor hours.

Faucet Replacement Cost Factors

A few key factors will affect the cost of replacing your existing faucet.

The first is the type of faucet you have. A basic faucet can be replaced for as little as $50, whereas a more high-end faucet can cost upwards of $200.

The second factor is the complexity of the installation. In case of a straightforward installation, you can even do it by yourself which would obviously save money. However, for a bit technical setup, always play safe and hire an expert.

The third factor is the type of finish you have. For example, a standard chrome finish will be less expensive than a brushed nickel finish.

Finally, the brand of faucets also comes into play. A higher-end brand will obviously be more expensive to replace than a lower-end brand.

So, keep all of these factors in mind when budgeting for your faucet replacement.

Bathroom Faucets Cost By Type

There are a few different types of bathroom faucets, and each one has a different price tag. We will have a deeper look at the three main types of bathroom faucets and how much they typically cost.

Single Handle Faucets

The first type is the most common and is also very easy to install. They usually have a lever that controls the hot and cold water and a knob that controls the flow rate. Single handle bathroom faucets typically cost between $50 and $550.

Touchless Faucets

Another type of bathroom faucet is the touchless variety. These are becoming more popular in recent years due to offering a more convenient way to control the water. Touchless bathroom faucets typically cost between $140 and $500.

Centerset Faucets

The next type is Centerset bathroom faucets and they come with two handles, one for hot water and one for cold. They are usually mounted on a 4-inch center set, which is the distance between the two outside holes. Centerset bathroom faucets typically cost between $30 and $299.

Widespread Faucets

Another type is Widespread Faucets and as the name suggests, these have three separate pieces; two handles and a spout. More suitable for larger bathrooms, they offer some much-needed flexibility when it comes to controlling the water. Widespread bathroom faucets can cost as low as $70 and as high as $900.

Wall-Mounted Faucets

Next, we have Wall-mounted Faucets. An increasingly popular option as they offer a sleek and modern look and are also very easy to install not requiring any drilling whatsoever. Wall-mounted bathroom faucets typically cost between the range of $80 to $600.

Vessel Faucets

Vessel Faucets sit on top of the counter and are often used in high-end bathrooms for donning a cool luxurious look. Vessel faucets typically cost between $75 and $600.

DIY Vs. Hire A Professional

When it comes to installing faucets, there are two schools of thought: one that believes in the DIY approach and the other that prefers to hire a professional. Both systems have pros and cons, and the best option for you will ultimately depend on your own skillset and budget.

If you’re handy around the house and adapt to doing minor plumbing repairs here and there, then replacing a faucet may be a piece of cake for you. However, if DIY isn’t your thing, or your faucet setup has come with plenty of instructions, then it’s probably best to leave it to the professionals.

Of course, hiring a qualified plumber does come at a cost. It’s quite tricky here to weigh your options and decide what’s best for you. Fixing the faucet by yourself is certainly the cheaper option. But not having the required skill set, tools, or enough time means that you’ll need a pro to have your faucet running smoothly.

Cost Of Tub/Shower Faucets

The cost of tub and shower faucets can vary greatly depending on the type of fixtures you choose. For example, a basic single-lever faucet may only cost a few hundred dollars, whereas a fancy waterfall faucet can easily go way beyond $370. In addition, the finish of your fixtures also plays a role in determining the price. A simple chrome finish may be less expensive such as $50, than a brushed nickel or oil-rubbed bronze finish that comes in a range of $300+.

However, it’s important to keep in mind that the price is not always indicative of quality. In fact, some of the most expensive tub and shower faucets are made with subpar materials and craftsmanship. As such, it’s important to do your research before making a purchase. By comparing prices and reviews, you’ll get your hands on the best possible deal for your new tub or shower faucet.

Cost Of Replacing Bathtub Faucets

The cost of replacing bathtub faucets can vary depending on the type of faucet and the complexity of the installation. The average cost of replacing a bathtub faucet is between $300 and $400. This price range includes both the cost of the faucet itself and the cost of labor for installation.

Of course, there are always exceptions to this rule. Having a particularly complex bathroom faucet installation or choosing a high-end faucet automatically means that you’ll have to pay more. Conversely, a budget-friendly faucet requiring simple installation won’t cost you a fortune. With that said, consult with a professional plumber to get an accurate estimate for your specific project.

Cost Of Installing Wall Mounted Faucets

Overall, the cost of installing a wall-mounted faucet ranges from $200 to $600, depending on the factors mentioned below. With proper planning and research, you can find a great deal on a quality faucet that will last for years to come.

Now let’s look at the factors that can change the cost of installing a wall-mounted faucet. The first is the type of faucet which includes a wide variety of styles and finishes as well. The second factor is the complexity of the installation.

Note that installing wall-mounted is more expensive than other faucet installations — almost 30 percent more costly. Finally, some homes may require additional permits or inspections for wall-mounted fixtures.

Faucet Materials And Finishes

There are different materials and finishes available for faucets, and it can be really hard to choose one! Here is the list of materials and finishes so that you know them better and make an informed decision.

Materials

Brass

Brass is a common material used in the manufacturing of faucets. It is an alloy of copper and zinc, and this very combination of metals gives brass its trademark strength and durability. Brass is a popular choice for faucets because it is less likely to corrode than other materials, and has a natural resistance to bacteria.

Stainless

Stainless is also a great material for faucets for plenty of reasons. It’s durable, doesn’t show fingerprints or water spots, and is easy to clean. Stainless faucets also have a very classy modern look that can upgrade your kitchen or bathroom seamlessly. So, go for stainless to make a regret-free choice.

Zinc

The zinc faucet has been a popular choice for many years due to its stylish appearance and resistance to corrosion. However, zinc is a soft metal and can be scratched or damaged somewhat easily. As a result, zinc faucets are often coated with another material, such as powder coating or enamel, to protect them from wear and tear.

Plastic

A plastic faucet is made from a unique plastic that is extremely strong and resistant to both heat and cold. This plastic is also very flexible, making it ideal for use in plumbing applications. In addition, plastic faucets are very easy to install and don’t require any special tools or skills. That’s why plastic faucets have become the material of choice for many homeowners and businesses.

Finishes

Pewter and zinc faucet finishes

Pewter and zinc faucet finishes are commonly applied to faucets and are very popular too for being tough and low maintenance. This finish will not tarnish or rust over time. Pewter and zinc faucet finishes are also scratch-resistant and can be easily cleaned with a soft cloth and mild soap and water solution.

Gold, silver, and platinum faucet finishes

Gold: A classic look that never goes out of style; gold finish faucets add an air of luxury to any space. It is also an excellent choice for those who want a warm, neutral tone in their kitchen or bathroom. Gold subtly reflects light and can help to make a small room feel brighter and more open.

Silver: Sleek and modern, silver finish faucets are popular for contemporary spaces. Silver pairs well with stainless steel appliances and other cool-toned finishes. It can also help create a sense of serenity in a busy kitchen or bathroom.

Platinum: Platinum finish faucets are the perfect way to add a touch of glamour to your space. Platinum is a rich, warm metal that catches the light beautifully. It’s also very durable, making it an excellent choice for high-traffic areas.

Brass-finished Faucets

Now we have brass-finished faucets. Brass is an alloy of copper and zinc, and it is used not just for faucet finishing but for a variety of other objects too including musical instruments, jewelry, and hardware. Being a highly reflective surface, it is resistant to corrosion and easy to clean. In addition, brass is a very strong material and can withstand a great deal of wear and tear.

Nickel-finished Faucets

It is a type of faucet that is coated with a layer of nickel. This finish helps to protect the faucet from corrosion and gives it a more polished look. Nickel-finished faucets are available in various styles, so you can choose one that best suits your needs. If your preference is for a durable and stylish faucet, a nickel-finished faucet may be the right choice for you.

Stainless-finished Faucets

It is a type of faucet that is coated with a layer of stainless steel. It gives the faucet a smooth, shiny finish that is resistant to corrosion and staining. Stainless-finished faucets are available in various styles and designs, and they can be used in both kitchen and bathroom remodeling. While they are more expensive than other types of faucets, their durability and easy maintenance make them a popular choice for many homeowners.

Chrome-finished Faucets

This type of faucet is generally more expensive than other types of faucets, but it can add a touch of class to any bathroom. Chrome finished faucets are generally made from brass or stainless steel and then plated with chrome. The advantage of this type of faucet is that it is very resistant to corrosion and is very easy to clean just like any quality faucet.

Do I Need A Plumber To Install A Faucet?

Many homeowners enjoy installing their own plumbing fixtures. Replacing a faucet is comparatively easy and can be done with a minimum of tools and little guidance.

But when it comes to installing a new fixture, it is best to leave the work to a qualified plumber. The task certainly requires some serious skills and attention to detail. As you need to take measurements, have the necessary tools in hand and shut off the water supply. Needless to say, it’s very much possible to ignore the subtle details by an amateur.

In addition, connecting the water lines to the new faucet can be tricky and, if not done properly, can result in leakages. Long story short, if you are unsure of your ability to complete the installation correctly, call a plumber.

Additional Or Unexpected Costs

There are a few additional or unexpected costs that you might encounter when shopping for a new kitchen or bathroom faucet. Here’s what to keep in mind:

When you’re replacing an old faucet, you’ll need to remove the old one and dispose of it properly. It can sometimes be difficult, especially if the old faucet is attached to the plumbing. You may have to call a plumber to help you with this.

Similarly while installing a new faucet, you’ll need to purchase/rent out the necessary installation hardware. It can include things like hoses, adapters, and connectors.

Lastly finishes can also cost you some extra bucks as some are more expensive than others. For example, brass and stainless steel finishes tend to be more pricey than chrome or nickel.

Permits

Depending on your location, a permit may be required before installing a new kitchen or bathroom faucet. You should check with your local building department to confirm if the permit is actually required. Rarely an inspection may also be required. Although replacing doesn’t require any permit, installing a new faucet would require one.

In the same way, installing or replacing a faucet on your own would also require a permit as it may have a link with other pipes that are connected with your neighbors as well. We assume that your plumber will know about the necessary permits and inspections. That comes as an extra perk along with their quality service.

Plumbers, kitchen and bathroom remodelers, and general contractors are all qualified to install faucets. Getting multiple bids before hiring a contractor will ensure that you’re keeping things budget-friendly. It goes without saying that the contractor should be licensed, insured, and bonded.

How Long Will It Take To Replace A Faucet?

Most plumbing jobs are relatively straightforward and can be completed pretty quickly. However, some jobs including that of replacing a faucet, require a bit more time and effort. On average, it takes an hour or two to replace the faucet. It is definitely not as time-consuming as installing a new faucet that can take up to 6-7 hours.

If you’re not sure how to do it, you could end up causing more damage than good. Therefore, it’s always best to err on the side of caution and call a plumber. Plumbers usually charge by the hour, so the cost will depend on how long it takes them to complete the job. Nevertheless, they should be able to replace a faucet in less than two hours.